Home | Contact Us
Bringing you the best in industrial
products & solutions.


Briskheat Heat Tape

Fiberglass Heat TapeBriskHeat Flexible Heating Tapes are constructed of multi-strand, 36-40 gauge resistance wires insluated with braided fiberglass or Samox yarns and knitted into flat tapes This unique serpentine construction imparts a high dgree of flexibility, ruggedness and uniform heat distribution. Choose from Standard Insulated Heating Tape, Heavy Insulated Heating Tape, Wide Heavy Insulated Heating Tape, Silicone Rubber Heating Tape, and Dual Element Silicone Rubber Insulated Tape


Briskheat Drum Heaters

These drum heaters are designed to provide practical, efficient means of freeze protection, viscosity control and maintenance of materials at elevated temperatures. Our drum heaters are available in both standard sizes and custom designs in order to meet a variety of applications.


Briskheat Heat Blankets

BH Thermal's flexible heating elements are designed for heating large surfaces for process temperature control, freeze protection, viscosity control and many other applications. They are constructed using silicon rubber lamination technology and are available in a variety of configurations including: drum heaters, tapes, blankets of many sizes with and without pressure sensitive adhesives. Drum heaters and some tapes have built-in thermostatic controllers. Blankets and other tapes require a temperature controller. Flexible Heating Elements & Blankets
Login

Rotary Piston Vacuum Pumps:
HVC Series Double Stage Rotary Piston Vacuum Pumps

Description
HullVac Pump's Double Stage Rotary Piston Vacuum Pumps feature the next generation of vacuum pump technology. If micron range ultimate vacuum and high reliability is required, HVC Series Vacuum Pumps are an excellent choice.

Ruggedly constructed from chemical resistant cast iron, HVC series vacuum pumps feature hardened shafts and Viton® shaft seals. Our rotary piston design and low rotational speeds reduce wear. Replacing a single stage pump with a compound pump increases vacuum system performance by reducing pump down time and base pressure. When low base pressure is required, a less expensive, lower capacity compound pump can equal the performance of larger, single-stage pumps. 		HVC Series Double Stage Rotary Piston Vacuum Pumps
Features
Double Stage Design
Second stage enhances capacity below 250 microns and allows full gas ballast operation while maintaining micron range blank off.
Sealed Bearings
Bearing life is enhanced by isolating them from harmful process grit and solvents. No center wall bearing enhances reliability.
Tough Valve Assemblies
Heavy duty studs, springs and wear plates are mounted to hardened steel seats designed to prevent broken springs from falling into the pumping chamber.
Metal Belt Guards
Steel construction enhances safety and durability.
Large Site Port
Large diameter glass site port with stainless steel bezel and o-ring seal makes checking oil level and condition easy.
Oil Flow Indicator
An oil stream splashes onto the site port ensuring easy verification even when oil is opaque.
Redundant Shaft Seals
Triple redundant Viton shaft seals ride on hardened steel sleeves to guard against leakage.
Caged Hinge Bars
One piece construction enhances wear life and reduces operating noise.
Rugged Construction
Body is constructed from chemical resistant cast iron.
Benefits
Low Vibration
Three chamber design provides exceptional balance. Pump operates with minimal vibration sitting on any flat surface.
After Sale Support
Three Year Limited Warranty and Uptime program offer assurance long after the initial installation.
Applications
Typical applications include:
  • Vacuum Furnaces
  • Potting
  • Impregnation
  • Roll Coating
  • Metallizing
  • Freeze Drying
  • Chemical Vapor Deposition

    • Specifations and Ranges
    For pump specifications, click on a pump below or select the product information under Additional Information.
    Additional Information
    HC18/HVC35 Vacuum Pump Specifications (PDF)
    HVC160 Vacuum Pump Specifications (PDF)
    HVC65 Vacuum Pump Specifications (PDF)

    Products:
    Part Number Description
    HC18 Two Stage Rotary Piston Vacuum Pump - 18 cfm, air cooled
    HVC180 Two Stage Rotary Piston Vacuum Pump - 180 cfm, water cooled
    HVC35 Two Stage Rotary Piston Vacuum Pump - 35 cfm, air cooled
    HVC65 Two Stage Rotary Piston Vacuum Pump - 65 cfm, water cooled
    HVCW35 Two Stage Rotary Piston Vacuum Pump - 35 cfm, water cooled

    Return to top of page
    Request Additional Information
    Please Call (801) 486-1015 for Orders or Information